1.4401 Tuljave in trakovi iz nerjavečega jekla
Enakovredne ocene
| Razred | UNS | DIN | JIS | SL | AFNOR | BS |
|---|---|---|---|---|---|---|
| SS 316 | S31600 | 1.4401 / 1.4436 | SUS 316 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 | Z7CND17‐11‐02 | 316S31 / 316S33 |
Standardna specifikacija
Premer : 1000mm / 1120mm / 1250 / 1525mm / 2000mm itd.
Debelina: 0,31 mm-100 mm
Dolžina: po vaši zahtevi
Površinska obdelava: 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, ogledalo, toplo valjana plošča (HR), hladno valjana pločevina (CR), SATIN (spojen s prevleko iz plastike) itd.
Trdota: Mehka, trda, poltrda, četrtina trda, vzmetna itd.
Oblika : Tuljave, trakovi itd.
Kemična sestava
| Standardno | Razred | C | Mn | Cr | Ni | Mo | N |
| EN 10028-7 | 1.4401 | ≤0,07 | ≤2,00 | 16.5-18.5 | 10.0-13.0 | 2.00-2.50 | ≤0,10 |
| EN 10088-2 | 1.4401 | ≤0,07 | ≤2,0 | 16.5-18.5 | 10.0-13.0 | 2.0-2.5 | ≤0,10 |
| EN 10088-3 | 1.4401 | ≤0,07 | ≤2,00 | 16.5-18.5 | 10.0-13.0 | 2.0-2.5 | ≤0,10 |
| EN 10088-4 | 1.4401 | ≤0,07 | ≤2,0 | 16.5-18.5 | 10.0-13.0 | 2.0-2.5 | ≤0,10 |
| Tipično | 4401 | 0.04 | 17.2 | 10.1 | 2.1 | ||
| ASTM A240 | TIP 316 | ≤0,08 | ≤2,00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | ≤0,10 |
| ASTM A240 | TIP 316H | 0.04-0.10 | ≤2,00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | |
| ASTM A666 | TIP 316 | ≤0,08 | ≤2,00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | ≤0,10 |
| IS 6911 | ISS 316 | ≤0,08 | ≤2,00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | ≤0,10 |
| IS 6911 | ISS 316H | 0.04-0.10 | ≤2,00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 |
Mehanske lastnosti
| Standardno | Razred | Rp0.2 | Rp1.0 | Rm | Rockwell | HB |
| MPa | MPa | MPa | ||||
| Tip izdelka: Hladno valjani kolobar in pločevina | ||||||
| debelina 1 mm | 300 | 325 | 630 | |||
| ASTM A240 | TIP 316 | ≥ 205 | ≥ 515 | ≤ 217 | ||
| ASTM A240 | TIP 316H | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| EN 10028-7 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| EN 10088-2 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| EN 10088-4 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| IS 6911 | ISS 316 | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| IS 6911 | ISS 316H | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| Tip izdelka: Vroče valjani kolobar in pločevina | ||||||
| Običajno (debelina 4 mm) | 300 | 350 | 600 | 170 | ||
| ASTM A240 | TIP 316 | ≥ 205 | ≥ 515 | ≤ 217 | ||
| ASTM A240 | TIP 316H | ≥ 205 | ≥ 515 | ≤ 217 | ||
| EN 10028-7 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| EN 10088-2 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| EN 10088-4 | 1.4401 | ≥ 240 | ≥ 270 | 530-680 | ||
| IS 6911 | ISS 316 | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| IS 6911 | ISS 316H | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| Tip izdelka: Vroče valjana jeklena plošča | ||||||
| debelina 15 mm | 260 | 300 | 570 | |||
| ASTM A240 | TIP 316 | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| ASTM A240 | TIP 316H | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| EN 10028-7 | 1.4401 | ≥ 220 | ≥ 260 | 520-670 | ||
| EN 10088-2 | 1.4401 | ≥ 220 | ≥ 260 | 520-670 | ||
| EN 10088-4 | 1.4401 | ≥ 220 | ≥ 260 | 520-670 | ||
| IS 6911 | ISS 316 | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
| IS 6911 | ISS 316H | ≥ 205 | ≥ 515 | ≤ 95HRB | ≤ 217 | |
